CipherLab 1504 Guide de l'utilisateur Page 72
- Page / 217
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
60
Enter Setup
1504 Barcode Scanner
User Guide
2.5 DIRECT USB VCOM_CDC
For USB Virtual COM, connect the scanner to the USB port of PC. Run HyperTerminal.exe
on the computer, and the scanned data will be transmitted to the computer.
Note: If using USB Virtual COM for the first time, it must install its driver from the
CD-ROM. USB CDC driver installer is available in the “Windows” folder for 1504,
which will copy a vendor-supplied INF file to Windows.
2.5.1 ACTIVATE USB VCOM_CDC
Activate
Direct USB VCOM_CDC
2.5.2 INTER-FUNCTION DELAY
By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
Inter-Function
Delay… (*0~254)
1) Read the barcode above to specify the inter-function delay.
2) Read the “
Decimal Value” barcode on page 193 for the desired inter-function delay
(millisecond).
3) Read the “Validate” barcode on the same page to complete this setting.
- 1504 Barcode Scanne 1
- IMPORTANT NOTICES 3
- RELEASE NOTES 5
- CONTENTS 7
- INTRODUCTION 13
- SYMBOLOGIES SUPPORTED 15
- QUICK START 17
- ENTER CONFIGURATION MODE 18
- EXIT CONFIGURATION MODE 18
- Refer to Appendix III 23
- LIST THE CURRENT SETTINGS 24
- Chapter 1 27
- 1.1 POWER 28
- 1.2 TRANSMIT BUFFER 28
- 1.4.2 GOOD READ BEEP 31
- 1.5 SEND “NR” TO HOST 32
- 1.6 SCAN MODES 33
- 1.6.1 TEST MODE 33
- 1.6.5 AIMING MODE 35
- 1.6.6 MULTI-BARCODE MODE 35
- 1.6.7 PRESENTATION MODE 36
- 1.8 DELAY BETWEEN RE-READ 38
- Auto Power Off mode 38
- Presentation mode 38
- 1.9 READ REDUNDANCY (1D) 39
- 1.11 AUTO-SENSE MODE 41
- 1.12 NEGATIVE BARCODES 41
- All 1D symbologies 42
- Data Matrix 42
- QR Code 42
- Aztec 42
- 1.13 CABLE AUTO-DETECT 43
- 1.14 PICKLIST MODE 44
- Chapter 2 45
- 2.1 KEYBOARD WEDGE 46
- US Keyboard Style – Normal 49
- 49
- Cap Lock Type Description 51
- 2.1.3 INTER-CHARACTER DELAY 54
- 2.1.4 INTER-FUNCTION DELAY 55
- 2.2 RS-232 56
- 2.2.2 BAUD RATE 56
- 2.2.3 DATA BITS 57
- 2.2.4 PARITY 57
- 2.2.5 STOP BIT 57
- 2.2.6 FLOW CONTROL 58
- 2.2.7 INTER-CHARACTER DELAY 59
- 2.2.8 INTER-FUNCTION DELAY 59
- 2.2.9 ACK/NAK TIMEOUT 60
- 2.3 DIRECT USB HID 61
- 2.3.3 INTER-CHARACTER DELAY 68
- 2.3.4 INTER-FUNCTION DELAY 68
- 2.3.6 HID TRANSMIT SPEED 69
- 2.4 DIRECT USB VCOM 70
- 2.4.2 INTER-FUNCTION DELAY 70
- 2.4.3 ACK/NAK TIMEOUT 71
- 2.5 DIRECT USB VCOM_CDC 72
- 2.5.1 ACTIVATE USB VCOM_CDC 72
- 2.5.2 INTER-FUNCTION DELAY 72
- 2.5.3 ACK/NAK TIMEOUT 73
- Chapter 3 75
- 3.1 CODABAR 76
- 3.1.2 CLSI CONVERSION 76
- 3.2 CODE 25 – INDUSTRIAL 25 78
- 3.3 CODE 25 – INTERLEAVED 25 80
- 3.3.1 VERIFY CHECK DIGIT 80
- 3.3.2 TRANSMIT CHECK DIGIT 80
- 3.3.3 CONVERT TO EAN-13 81
- 3.4 CODE 25 – MATRIX 25 83
- 3.4.1 VERIFY CHECK DIGIT 83
- 3.4.2 TRANSMIT CHECK DIGIT 83
- 3.5 CODE 25 – CHINESE 25 85
- 3.7 CODE 39 87
- 3.7.1 VERIFY CHECK DIGIT 87
- 3.7.2 TRANSMIT CHECK DIGIT 87
- 3.8 TRIOPTIC CODE 39 90
- 3.9 CODE 93 91
- 3.10 CODE 128 93
- 3.11 GS1-128 (EAN-128) 94
- 3.11.1 TRANSMIT CODE ID 94
- GS1 DataBar Expanded 99
- 1504 Barcode Scanner 100
- User Guide 100
- 3.13.5 CONVERT TO UPC/EAN 101
- 3.14 MSI 102
- 3.14.1 VERIFY CHECK DIGIT 102
- 3.14.2 TRANSMIT CHECK DIGIT 102
- 3.15 EAN-8 104
- 3.16 EAN-13 105
- 3.16.1 CONVERT TO ISBN 106
- 3.16.2 CONVERT TO ISSN 106
- *Disable 107
- 3.18 UPC-A 108
- 3.18.2 TRANSMIT CHECK DIGIT 109
- 3.19 UPC-E 110
- 3.19.4 TRANSMIT CHECK DIGIT 112
- 3.20 CODE 11 113
- 3.20.1 VERIFY CHECK DIGIT 113
- 3.20.2 TRANSMIT CHECK DIGIT 113
- 3.21 COMPOSITE CODE 115
- 3.21.1 COMPOSITE CC-A/B 115
- 3.21.2 COMPOSITE CC-C 115
- 3.21.3 COMPOSITE TLC-39 115
- 3.22 US POSTAL CODE 117
- 3.22.1 US POSTNET 117
- 3.22.2 US PLANET 117
- 3.22.3 TRANSMIT CHECK DIGIT 117
- 3.23 UK POSTAL CODE 118
- 3.23.1 UK POSTAL 118
- 3.23.2 TRANSMIT CHECK DIGIT 118
- 107 119
- 3.24.5 UPU FICS POSTAL 120
- 3.25 2D SYMBOLOGIES 121
- 3.25.1 PDF417 121
- 3.25.2 MicroPDF417 121
- 3.25.3 DATA MATRIX 122
- 3.25.4 MAXICODE 123
- 3.25.5 QR CODE 123
- 3.25.6 MicroQR 123
- 3.25.7 AZTEC 123
- Chapter 4 127
- 127 139
- 131 143
- 4.4.2 CHANGE CODE ID 144
- 133 145
- 4.4.3 CLEAR CODE ID SETTINGS 147
- 4.5 LENGTH CODE 148
- 143 155
- Length Code for QR Code 155
- Length Code for MicroQR 155
- Length Code for Aztec 155
- 4.6 MULTI-BARCODE EDITOR 156
- Code Type 156
- Chapter 5 161
- 5.1.2 EXCLUSIVE DATA EDITING 163
- 5.2.2 RESTORE DEFAULT FORMAT 166
- 5.3.1 APPLICABLE CODE TYPE 167
- 5.3.2 DATA LENGTH 177
- Specify a value 177
- 5.4.3 TOTAL NUMBER OF FIELDS 180
- 5.4.4 FIELD SETTINGS 181
- 171 183
- Field 3 Setting 183
- 173 185
- Field 5 Setting 185
- 5.4.5 PAUSE FIELD SETTING 187
- 177 189
- 5.6 PROGRAMMING EXAMPLES 190
- 5.6.1 EXAMPLE I 190
- 179 191
- SPECIFICATIONS 193
- Appendix I 195
- Click [OK] 196
- USING USB VIRTUAL COM 197
- Appendix II 199
- Appendix III 201
- KEY TYPE & STATUS 203
- KEY TYPE 203
- KEY STATUS 203
- EXAMPLE 204
- Appendix IV 205
- HEXADECIMAL SYSTEM 206
- ASCII TABLE 207
- Appendix V 208
- OUTPUT SEQUENCE SETUP 209
- 199 211
- 201 213
- SEPARATORS AND FIELDS 215
- EDIT SEPARATORS 216
Produits connexes et manuels pour Lecteurs de codes-barres CipherLab 1504
(12 pages)
(277 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.332 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels