CipherLab 1520 Guide de l'utilisateur télécharger pdf (Page 45)

Chapter 4 Emulation Settings

Horizontal / Vertical Steps

Press the following key combinations simultaneously –

 FN + Left (for 8300/8400/8500 Series) or FN + “-+$” (for 8000 Series)

 FN + Right (for 8300/8400/8500 Series) or FN + “%#•” (for 8000 Series)

 FN + Up

 FN + Down

When the Cursor Tracking feature is enabled, there will be a warning beep to indicate that the

terminal screen has reached the boundaries of the host screen.

Note: For 8500 Series, the above function keys are originally used to adjust LCD

contrast (FN + Up/Down) and backlight intensity (FN + Left/Right). After

logging on to a host, these keys will be used to adjust the terminal screen instead.

That is, you cannot use them to adjust LCD contrast and backlight intensity until

you log out.

Cursor Movement

 To move the cursor to a desired input field, press the function key that is mapped to “Tab”.

 To move the cursor to a desired input point, press the arrow keys Up, Down, Left, and Right.

4.4.6 TRIM SPACES

Select the check box to make the most use of the terminal screen; unnecessary spaces

will be discarded. Take the following for example.

Original line:

-> 1. Set up<-

Trimmed

->1. Set up<-

Note: Spaces between characters will not be discarded.

4.4.7 DISABLE LOCAL ECHO

By default, it will echo typed text locally on the mobile computer.

 Select the check box if local echo is not desired.

4.4.8 CURSOR FLASHING

Select the check box to have a flashing cursor.

4.4.9 LINE BUFFER

Select the check box to operate in line buffer mode.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 90 91

Pas de commentaire

CipherLab 1520 Guide de l'utilisateur Page 45