CipherLab 1504 Guide de l'utilisateur Page 129
- Page / 217
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
117
Update
Chapter 4
Definin
g
Output Format
4.2.1 SELECT A SET FOR CHARACTER SUBSTITUION
Configure Set 1
Configure Set 2
Configure Set 3
1) Read the barcode above to enable character substitution by set.
For example, have the scanner read the “Set 1” barcode to configure the first set of
character substitution. The scanner will respond with one short beep, high tone, to
indicate more setup barcodes are required.
2) Read the “
Hexadecimal Value” barcode on page 194 for the desired character
substitution. For example,
KEY TYPE = NORMAL
Read “3”, “0”, “2”, and “D” to replace the character “0” with a dash “-”.
Read “3”, “0”, “2”, “D”, “3”, and “0” to replace the character “0” with a dash “-0”.
KEY TYPE = SCAN CODE
Replace the character “0” with “a” (= “1C” on the scan code table):
1. Read “3” and “0”.
2. Read the “Scan Code” barcode.
3. Read “1” and “C”.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
Replace the character “0” with “!” (= “Shift” + “1” on keyboard):
1. Read “3” and “0”.
2. Read the “Add Shift” barcode.
3. Read “3” and “1”.
3) Read the “Validate” barcode to complete this setting. (The defined set or sets will be
applied to all symbologies by default.)
- 1504 Barcode Scanne 1
- IMPORTANT NOTICES 3
- RELEASE NOTES 5
- CONTENTS 7
- INTRODUCTION 13
- SYMBOLOGIES SUPPORTED 15
- QUICK START 17
- ENTER CONFIGURATION MODE 18
- EXIT CONFIGURATION MODE 18
- Refer to Appendix III 23
- LIST THE CURRENT SETTINGS 24
- Chapter 1 27
- 1.1 POWER 28
- 1.2 TRANSMIT BUFFER 28
- 1.4.2 GOOD READ BEEP 31
- 1.5 SEND “NR” TO HOST 32
- 1.6 SCAN MODES 33
- 1.6.1 TEST MODE 33
- 1.6.5 AIMING MODE 35
- 1.6.6 MULTI-BARCODE MODE 35
- 1.6.7 PRESENTATION MODE 36
- 1.8 DELAY BETWEEN RE-READ 38
- Auto Power Off mode 38
- Presentation mode 38
- 1.9 READ REDUNDANCY (1D) 39
- 1.11 AUTO-SENSE MODE 41
- 1.12 NEGATIVE BARCODES 41
- All 1D symbologies 42
- Data Matrix 42
- QR Code 42
- Aztec 42
- 1.13 CABLE AUTO-DETECT 43
- 1.14 PICKLIST MODE 44
- Chapter 2 45
- 2.1 KEYBOARD WEDGE 46
- US Keyboard Style – Normal 49
- 49
- Cap Lock Type Description 51
- 2.1.3 INTER-CHARACTER DELAY 54
- 2.1.4 INTER-FUNCTION DELAY 55
- 2.2 RS-232 56
- 2.2.2 BAUD RATE 56
- 2.2.3 DATA BITS 57
- 2.2.4 PARITY 57
- 2.2.5 STOP BIT 57
- 2.2.6 FLOW CONTROL 58
- 2.2.7 INTER-CHARACTER DELAY 59
- 2.2.8 INTER-FUNCTION DELAY 59
- 2.2.9 ACK/NAK TIMEOUT 60
- 2.3 DIRECT USB HID 61
- 2.3.3 INTER-CHARACTER DELAY 68
- 2.3.4 INTER-FUNCTION DELAY 68
- 2.3.6 HID TRANSMIT SPEED 69
- 2.4 DIRECT USB VCOM 70
- 2.4.2 INTER-FUNCTION DELAY 70
- 2.4.3 ACK/NAK TIMEOUT 71
- 2.5 DIRECT USB VCOM_CDC 72
- 2.5.1 ACTIVATE USB VCOM_CDC 72
- 2.5.2 INTER-FUNCTION DELAY 72
- 2.5.3 ACK/NAK TIMEOUT 73
- Chapter 3 75
- 3.1 CODABAR 76
- 3.1.2 CLSI CONVERSION 76
- 3.2 CODE 25 – INDUSTRIAL 25 78
- 3.3 CODE 25 – INTERLEAVED 25 80
- 3.3.1 VERIFY CHECK DIGIT 80
- 3.3.2 TRANSMIT CHECK DIGIT 80
- 3.3.3 CONVERT TO EAN-13 81
- 3.4 CODE 25 – MATRIX 25 83
- 3.4.1 VERIFY CHECK DIGIT 83
- 3.4.2 TRANSMIT CHECK DIGIT 83
- 3.5 CODE 25 – CHINESE 25 85
- 3.7 CODE 39 87
- 3.7.1 VERIFY CHECK DIGIT 87
- 3.7.2 TRANSMIT CHECK DIGIT 87
- 3.8 TRIOPTIC CODE 39 90
- 3.9 CODE 93 91
- 3.10 CODE 128 93
- 3.11 GS1-128 (EAN-128) 94
- 3.11.1 TRANSMIT CODE ID 94
- GS1 DataBar Expanded 99
- 1504 Barcode Scanner 100
- User Guide 100
- 3.13.5 CONVERT TO UPC/EAN 101
- 3.14 MSI 102
- 3.14.1 VERIFY CHECK DIGIT 102
- 3.14.2 TRANSMIT CHECK DIGIT 102
- 3.15 EAN-8 104
- 3.16 EAN-13 105
- 3.16.1 CONVERT TO ISBN 106
- 3.16.2 CONVERT TO ISSN 106
- *Disable 107
- 3.18 UPC-A 108
- 3.18.2 TRANSMIT CHECK DIGIT 109
- 3.19 UPC-E 110
- 3.19.4 TRANSMIT CHECK DIGIT 112
- 3.20 CODE 11 113
- 3.20.1 VERIFY CHECK DIGIT 113
- 3.20.2 TRANSMIT CHECK DIGIT 113
- 3.21 COMPOSITE CODE 115
- 3.21.1 COMPOSITE CC-A/B 115
- 3.21.2 COMPOSITE CC-C 115
- 3.21.3 COMPOSITE TLC-39 115
- 3.22 US POSTAL CODE 117
- 3.22.1 US POSTNET 117
- 3.22.2 US PLANET 117
- 3.22.3 TRANSMIT CHECK DIGIT 117
- 3.23 UK POSTAL CODE 118
- 3.23.1 UK POSTAL 118
- 3.23.2 TRANSMIT CHECK DIGIT 118
- 107 119
- 3.24.5 UPU FICS POSTAL 120
- 3.25 2D SYMBOLOGIES 121
- 3.25.1 PDF417 121
- 3.25.2 MicroPDF417 121
- 3.25.3 DATA MATRIX 122
- 3.25.4 MAXICODE 123
- 3.25.5 QR CODE 123
- 3.25.6 MicroQR 123
- 3.25.7 AZTEC 123
- Chapter 4 127
- 127 139
- 131 143
- 4.4.2 CHANGE CODE ID 144
- 133 145
- 4.4.3 CLEAR CODE ID SETTINGS 147
- 4.5 LENGTH CODE 148
- 143 155
- Length Code for QR Code 155
- Length Code for MicroQR 155
- Length Code for Aztec 155
- 4.6 MULTI-BARCODE EDITOR 156
- Code Type 156
- Chapter 5 161
- 5.1.2 EXCLUSIVE DATA EDITING 163
- 5.2.2 RESTORE DEFAULT FORMAT 166
- 5.3.1 APPLICABLE CODE TYPE 167
- 5.3.2 DATA LENGTH 177
- Specify a value 177
- 5.4.3 TOTAL NUMBER OF FIELDS 180
- 5.4.4 FIELD SETTINGS 181
- 171 183
- Field 3 Setting 183
- 173 185
- Field 5 Setting 185
- 5.4.5 PAUSE FIELD SETTING 187
- 177 189
- 5.6 PROGRAMMING EXAMPLES 190
- 5.6.1 EXAMPLE I 190
- 179 191
- SPECIFICATIONS 193
- Appendix I 195
- Click [OK] 196
- USING USB VIRTUAL COM 197
- Appendix II 199
- Appendix III 201
- KEY TYPE & STATUS 203
- KEY TYPE 203
- KEY STATUS 203
- EXAMPLE 204
- Appendix IV 205
- HEXADECIMAL SYSTEM 206
- ASCII TABLE 207
- Appendix V 208
- OUTPUT SEQUENCE SETUP 209
- 199 211
- 201 213
- SEPARATORS AND FIELDS 215
- EDIT SEPARATORS 216
Produits connexes et manuels pour Lecteurs de codes-barres CipherLab 1504
(12 pages)
(277 pages)© 2020, manymanuals.fr. Tous droits réservés | 2.300 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels